Back to D-series page
Over to Sizing Grid
Back to DFI Homepage
Note: this cover does have stainless steel hinges, but they aren't shown
in these photos (they're on the end opposite the handles.) Most D303 covers
feature extra handles on the long side to help "walk" the cover
backwards when one person is tipping the cover from the base. A hasp is
also standard equipment, though this photo was taken before the hasp had
been installed. A 30# spring-loaded latch isn't necessary on the D303, due
to the natural weight of the cover (the latch ensures that the cover is
pulled tight against the base on smaller covers.) A taller 'customized'
base may be provided at extra cost for porting larger exhaust pipes.